| Li W L, Wang G, Zhang G, Pang C T and Yin Z P 2016 A novel path generation method of onsite 5-axis surface inspection using the dual-cubic NURBS representation Meas. Sci. Technol. 27 095003 |
| Chen S H and Perng D B 2016 Automatic optical inspection system for IC molding surface J. Intell. Manuf. 27 915–26 |
| Bi Q Z, Huang N D, Zhang S K, Shuai C L and Wang Y H 2019 Adaptive machining for curved contour on deformed large skin based on on-machine measurement and isometric mapping Int. J. Mach. Tools Manuf. 136 34–44 |
| Lee H, Kim M Y and Moon J I 2017 Three-dimensional sensing methodology combining stereo vision and phase-measuring profilometry based on dynamic programming Opt. Eng. 56 124107 |
| Wang J, Wang X J, Liu F, Gong Y, Wang H H and Qin Z 2014 Modeling of binocular stereo vision for remote coordinate measurement and fast calibration Opt. Lasers Eng. 54 269–74 |
| Schlarp J, Csencsics E and Schitter G 2018 Optical scanning of laser line sensors for 3D imaging Appl. Opt. 57 5242–8 |
| Feng S J, Zuo C, Zhang L, Tao T Y, Hu Y, Yin W, Qian J M and Chen Q 2021 Calibration of fringe projection profilometry: a comparative review Opt. Lasers Eng. 143 106622 |
| Feng S J, Zhang L, Zuo C, Tao T Y, Chen Q and Gu G H 2018 High dynamic range 3D measurements with fringe projection profilometry: a review Meas. Sci. Technol. 29 122001 |
| Pei X H, Ren M J, Wang X, Ren J J, Zhu L M and Jiang X Q 2022 Profile measurement of non-Lambertian surfaces by integrating fringe projection profilometry with near-field photometric stereo Measurement 187 110277 |
| Bastas A 2020 Comparing the probing systems of coordinate measurement machine: scanning probe versus touch-trigger probe Measurement 156 107604 |
| Echerfaoui Y, El Ouafi A and Chebak A 2018 Experimental investigation of dynamic errors in coordinate measuring machines for high speed measurement Int. J. Precis. Eng. Manuf. 19 1115–24 |
| Krajewski G and Wó zniak A 2014 Simple master artefact for CMM dynamic error identification Precis. Eng. 38 64–70 |
| ISO 10360-1:2000 2022 Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 1: Vocabulary (available at: www.iso.org/standard/18418.html) |
| ISO 10360-2:2009 2020 Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring machines (CMM)—Part 2: CMMs used for measuring linear dimensions (available at: www.iso.org/ standard/40954.html) |
| Fan K C, Fei Y T, Wang W, Chen Y and Chen Y C 2008 Micro-CMM Smart Devices and Machines for Advanced Manufacturing ed L H Wang and J Xi (London: Springer) pp 319–35 |
| Kurfess T R and Hodgson T J 2007 Metrology, sensors and control Micromanufacturing ed K F Ehmann, D Bourell, M L Culpepper, T J Hodgson, T R Kurfess, M Madou, K Rajurkar and R Devor (Dordrecht: Springer) pp 89–109 |
| Spaan H A M and Widdershoven I 2011 Isara 400 ultra-precision CMM Proc. SPIE 8169 81690T |
| Schwenke H, Wäldele F, Weiskirch C and Kunzmann H 2001 Opto-tactile sensor for 2D and 3D measurement of small structures on coordinate measuring machines CIRP Ann. 50 361–4 |
| Küng A, Meli F and Thalmann R 2007 Ultraprecision micro-CMM using a low force 3D touch probe Meas. Sci. Technol. 18 319–27 |
| Claverley J D and Leach R K 2013 Development of a three-dimensional vibrating tactile probe for miniature CMMs Precis. Eng. 37 491–9 |
| Thalmann R, Meli F and Küng A 2016 State of the art of tactile micro coordinate metrology Appl. Sci. 6 150 |
| Li R J, Chen C, Li D D, Fan K C, Cheng Z Y, Huang Q X and Dang X M 2017 Ball tips of micro/nano probing systems: a review Chin. J. Mech. Eng. 30 222–30 |
| Fang F Z, Zhang X D, Weckenmann A, Zhang G X and Evans C 2013 Manufacturing and measurement of freeform optics CIRP Ann. 62 823–46 |
| Leach R 2020 Advances in Optical Form and Coordinate Metrology (Bristol: IOP Publishing) pp 2053–563 |
| ISO 230-1:2012 2017 Test code for machine tools—Part 1: geometric accuracy of machines operating under no-load or quasi-static conditions (available at: www.iso.org/ standard/46449.html) |
| Okafor A C and Ertekin Y M 2000 Derivation of machine tool error models and error compensation procedure for three axes vertical machining center using rigid body kinematics Int. J. Mach. Tools Manuf. 40 1199–213 |
| Liu C S, Pu Y F, Chen Y T and Luo Y T 2018 Design of a measurement system for simultaneously measuring six-degree-of-freedom geometric errors of a long linear stage Sensors 18 3875 |
| Zhang Y, Yang J G and Zhang K 2013 Geometric error measurement and compensation for the rotary table of five-axis machine tool with double ballbar Int. J. Adv. Manuf. Technol. 65 275–81 |
| Ibaraki S, Nagai Y, Otsubo H, Sakai Y, Morimoto S and Miyazaki Y 2015 R-test analysis software for error calibration of five-axis machine tools—application to a five-axis machine tool with two rotary axes on the tool side Int. J. Autom. Technol. 9 387–95 |
| Schwenke H, Knapp W, Haitjema H, Weckenmann A, Schmitt R and Delbressine F 2008 Geometric error measurement and compensation of machines—An update CIRP Ann. 57 660–75 |
| Geng Z C, Tong Z and Jiang X Q 2021 Review of geometric error measurement and compensation techniques of ultra-precision machine tools Light Adv. Manuf. 2 211–27 |
| Xiang S T and Altintas Y 2016 Modeling and compensation of volumetric errors for five-axis machine tools Int. J. Mach. Tools Manuf. 101 65–78 |
| Ramesh R, Mannan M A and Poo A N 2000 Error compensation in machine tools—a review: part I: geometric, cutting-force induced and fixture-dependent errors Int. J. Mach. Tools Manuf. 40 1235–56 |
| Lyu D, Liu Q, Liu H and Zhao W H 2020 Dynamic error of CNC machine tools: a state-of-the-art review Int. J. Adv. Manuf. Technol. 106 1869–91 |
| Tomizuka M 1987 Zero phase error tracking algorithm for digital control J. Dyn. Syst. Meas. Control 109 65–68 |
| Lo C C 2002 A tool-path control scheme for five-axis machine tools Int. J. Mach. Tools Manuf. 42 79–88 |
| Yang L, Zhang X, Wang L and Zhao W H 2021 Dynamic error of multiaxis machine tools considering position dependent structural dynamics and axis coupling inertial forces Proc. Inst. Mech. Eng. B 236 281–95 |
| Chan T C, Hong Y P and Yu J H 2021 Effect of moving structure on the spatial accuracy and compensation of the coordinate measuring machine Int. J. Precis. Eng. Manuf. 22 1551–61 |
| Echerfaoui Y, El Ouafi A and Sattarpanah Karganroudi S 2022 Dynamic errors compensation of high-speed coordinate measuring machines using ANN-based predictive modeling Int. J. Adv. Manuf. Technol. 122 2745–59 |
| Zhao B H, Gao F and Li Y 2015 Study on pre-travel behaviour of touch trigger probe under actual measuring conditions Proc. CIRP 27 53–58 |
| Li Y M, Zeng L, Tang K and Li S M 2019 A dynamic pre-travel error prediction model for the kinematic touch trigger probe Measurement 146 689–704 |
| Li S M, Zeng L, Feng P F, Li Y M, Xu C and Ma Y 2019 Accurate compensation method for probe pre- travel errors in on-machine inspections Int. J. Adv. Manuf. Technol. 103 2401–10 |
| Yang K Y, Zhang X, Li J B and Zhu L M 2020 An efficient calibration method for 3D nonlinear and nonorthogonal scanning probe in cylindrical CMM Proc. 13th Int. Conf. on Intelligent Robotics and Applications (Kuala Lumpur: Springer) pp 3–15 |
| ISO 10360-5:2020 2020 Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring systems (CMS)—Part 5: coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or scanning measuring mode (available at: www.iso.org/ standard/73431.html) |
| Ito S, Tsutsumi D, Kamiya K, Matsumoto K and Kawasegi N 2020 Measurement of form error of a probe tip ball for coordinate measuring machine (CMM) using a rotating reference sphere Precis. Eng. 61 41–47 |
| Li Y, Yu M L, Bai Y M, Hou Z Y and Wu W W 2021 A review of thermal error modeling methods for machine tools Appl. Sci. 11 5216 |
| Liu K, Liu H B, Li T, Liu Y and Wang Y Q 2019 Intelligentization of machine tools: comprehensive thermal error compensation of machine-workpiece system Int. J. Adv. Manuf. Technol. 102 3865–77 |
| Fan K C, Fei Y T, Yu X F, Wang W L and Chen Y J 2007 Study of a noncontact type micro-CMM with arch-bridge and nanopositioning stages Robot. Comput.-Integr. Manuf. 23 276–84 |
| Fan K C, Liu C L, Wu P T, Chen Y C and Wang W L 2007 The structure design of a micro-precision CMM with Abbé principle Proc. 35th Int. MATADOR Conf. ed S Hinduja and K C Fan (London: Springer) pp 297–300 |
| Liu H W, Xiang H, Chen J H and Yang R 2018 Measurement and compensation of machine tool geometry error based on Abbe principle Int. J. Adv. Manuf. Technol. 98 2769–74 |
| Ren J J, Ren M J, Sun L J, Zhu L M and Jiang X Q 2021 Generative model-driven sampling strategy for the high-efficiency measurement of complex surfaces on coordinate measuring machines IEEE Trans. Instrum. Meas. 70 1007911 |
| Yi B W, Qiao F, Huang N D, Wang X S, Wu S J and Biermann D 2021 Adaptive sampling point planning for free-form surface inspection under multi-geometric constraints Precis. Eng. 72 95–101 |
| Pagani L and Scott P J 2018 Curvature based sampling of curves and surfaces Comput. Aided Geom. Des. 59 32–48 |
| Sang Y C, Yan Y C, Yao C L and He G Y 2021 A new scanning lines distribution strategy for the form error evaluation of freeform surface on CMM Measurement 181 109578 |
| Li Z Y, Tang K, Hu P C and Huang L H 2022 Five-axis trochoidal sweep scanning path planning for free-form surface inspection IEEE Trans. Autom. Sci. Eng. 1–17 |
| Zhang Y, Zhu L M, Zhao P Y, Hu P C and Zhao X S 2022 Skeleton curve-guided five-axis sweep scanning for surface with multiple holes IEEE Trans. Autom. Sci. Eng. 19 2471–86 |
| Fang K T, Wang S G and Wei G 2001 A stratified sampling model in spherical feature inspection using coordinate measuring machines Stat. Probab. Lett. 51 25–34 |
| Lee G, Mou J and Shen Y 1997 Sampling strategy design for dimensional measurement of geometric features using coordinate measuring machine Int. J. Mach. Tools Manuf. 37 917–34 |
| Kim W S and Raman S 2000 On the selection of flatness measurement points in coordinate measuring machine inspection Int. J. Mach. Tools Manuf. 40 427–43 |
| Ainsworth I, Ristic M and Brujic D 2000 CAD-based measurement path planning for free-form shapes using contact probes Int. J. Adv. Manuf. Technol. 16 23–31 |
| Cho M W and Kim K 1995 New inspection planning strategy for sculptured surfaces using coordinate measuring machine Int. J. Prod. Res. 33 427–44 |
| Elkott D F, Elmaraghy H A and Elmaraghy W H 2002 Automatic sampling for CMM inspection planning of free-form surfaces Int. J. Prod. Res. 40 2653–76 |
| Rajamohan G, Shunmugam M S and Samuel G L 2011 Practical measurement strategies for verification of freeform surfaces using coordinate measuring machines Metrol. Meas. Syst. 18 209–22 |
| Zou Q and Zhao J B 2013 Iso-parametric tool-path planning for point clouds Comput. -Aided Des. 45 1459–68 |
| Yu M R, Zhang Y J, Li Y L and Zhang D 2013 Adaptive sampling method for inspection planning on CMM for free-form surfaces Int. J. Adv. Manuf. Technol. 67 1967–75 |
| Obeidat S M and Raman S 2009 An intelligent sampling method for inspecting free-form surfaces Int. J. Adv. Manuf. Technol. 40 1125–36 |
| He G Y, Sang Y C, Pang K R and Sun G M 2018 An improved adaptive sampling strategy for freeform surface inspection on CMM Int. J. Adv. Manuf. Technol. 96 1521–35 |
| Poniatowska M 2012 Deviation model based method of planning accuracy inspection of free-form surfaces using CMMs Measurement 45 927–37 |
| Petsiuk V, Das A and Saenko K 2018 RISE: randomized input sampling for explanation of black-box models Proc. British Machine Vision Conf. 2018 (Newcastle: BMVA Press) (https://doi.org/10.48550/arXiv.1806.07421) |
| Ghassemi M, Oakden-Rayner L and Beam A L 2021 The false hope of current approaches to explainable artificial intelligence in health care Lancet Digit. Health 3 e745–50 |
| Zhang W X and Xiao C X 2019 PCAN: 3D attention map learning using contextual information for point cloud based retrieval Proc. 2019 IEEE/CVF Conf. on Computer Vision and Pattern Recognition (Long Beach, CA: IEEE) pp 12436–45 |
| Hafiz A M, Parah S A and Bhat R U A 2021 Attention mechanisms and deep learning for machine vision: a survey of the state of the art Preprint (https://doi.org/ 10.21203/rs.3.rs-510910/v1) |
| Reyes M, Meier R, Pereira S, Silva C A, Dahlweid F M, von Tengg-kobligk H, Summers R M and Wiest R 2020 On the interpretability of artificial intelligence in radiology: challenges and opportunities Radiol. Artif. Intell. 2 e190043 |
| Qi Charles R, Su H, Kaichun M and Guibas L J 2017 PointNet: deep learning on point sets for 3D classification and segmentation Proc. 2017 IEEE Conf. on Computer Vision and Pattern Recognition (Honolulu, HI: IEEE) pp 652–60 |
| Säljö R 1979 Learning about learning High. Educ. 8 443–51 |
| Lang I, Manor A and Avidan S 2020 SampleNet: differentiable point cloud sampling Proc. 2020 IEEE/CVF Conf. on Computer Vision and Pattern Recognition (Seattle, WA: IEEE) pp 7578–88 |
| Willis K D D, Pu Y W, Luo J L, Chu H, Du T, Lambourne J G, Solar-Lezama A and Matusik W 2021 Fusion 360 gallery: a dataset and environment for programmatic CAD construction from human design sequences ACM Trans. Graph. 40 54 |
| Kim S, Chi H G, Hu X, Huang Q X and Ramani K 2020 A large-scale annotated mechanical components benchmark for classification and retrieval tasks with deep neural networks Proc. 16th European Conf. on Computer Vision (Glasgow: Springer) pp 175–91 |
| Zhang Z B, Jaiswal P and Rai R 2018 FeatureNet: machining feature recognition based on 3D convolution neural network Comput. Aided Des. 101 12–22 |
| Lu W L, Pagani L, Zhou L P, Liu X J, Wang J, Leach R and Jiang X Q 2019 Uncertainty-guided intelligent sampling strategy for high-efficiency surface measurement via free-knot B-spline regression modeling Precis. Eng. 56 38–52 |
| Yin Y H, Ren M J and Sun L J 2017 Dependant Gaussian processes regression for intelligent sampling of freeform and structured surfaces CIRP Ann. 66 511–4 |
| Ascione R, Moroni G, Petr` o S and Romano D 2013 Adaptive inspection in coordinate metrology based on kriging models Precis. Eng. 37 44–60 |
| Yang C F, Peng C Y, Chen Y H, Luo T T and Chu J R 2018 Space-filling scan paths and Gaussian process-aided adaptive sampling for efficient surface measurements Precis. Eng. 54 412–9 |
| ElKott D F and Veldhuis S C 2007 Cad-based sampling for CMM inspection of models with sculptured features Eng. Comput. 23 187–206 |
| Ren M J, Kong L B, Sun L J and Cheung C 2017 A curve network sampling strategy for measurement of freeform surfaces on coordinate measuring machines IEEE Trans. Instrum. Meas. 66 3032–43 |
| Zhou Z, Zhang Y and Tang K 2016 Sweep scan path planning for efficient freeform surface inspection on five-axis CMM Comput. -Aided Des. 77 1–17 |
| Spyridi A J and Requicha A A G 1990 Accessibility analysis for the automatic inspection of mechanical parts by coordinate measuring machines Proc. IEEE Int. Conf. on Robotics and Automation (Cincinnati, OH: IEEE) pp 1284–9 |
| Hu P C, Zhou H C, Chen J H, Lee C, Tang K, Yang J Z and Shen S Y 2018 Automatic generation of efficient and interference-free five-axis scanning path for free-form surface inspection Comput. -Aided Des. 98 24–38 |
| Shen Y J, Zhang W Z, Zhu L M and Zhang Y 2021 An image-based algorithm for generating smooth and interference-free five-axis sweep scanning path Robot. Comput.-Integr. Manuf. 71 102159 |
| Balasubramaniam M, Laxmiprasad P, Sarma S and Shaikh Z 2000 Generating 5-axis NC roughing paths directly from a tessellated representation Comput. -Aided Des. 32 261–77 |
| Morishige K, Takeuchi Y and Kase K 1999 Tool path generation using C-space for 5-axis control machining J. Manuf. Sci. Eng. 121 144–9 |
| Wang N and Tang K 2007 Automatic generation of gouge-free and angular-velocity-compliant five-axis toolpath Comput. -Aided Des. 39 841–52 |
| Lim C P and Menq C H 1994 CMM feature accessibility and path generation Int. J. Prod. Res. 32 597–618 |
| Wu Y Q, Liu S G and Zhang G X 2004 Improvement of coordinate measuring machine probing accessibility Precis. Eng. 28 89–94 |
| Li Y M, Zeng L, Tang K and Xie C 2020 Orientation-point relation based inspection path planning method for 5-axis OMI system Robot. Comput.-Integr. Manuf. 61 101827 |
| Spitz S N and Requicha A A G 2000 Accessibility analysis using computer graphics hardware IEEE Trans. Vis. Comput. Graph. 6 208–19 |
| Gao Y, Lin X J, Shi Y Y and Wang Z W 2019 Accessibility analysis in efficient inspection of closed blisk on 3-axis CMM with 2-axis probe head Precis. Eng. 57 104–12 |
| Chang H C and Lin A C 2010 Automatic inspection of turbine blades using 5-axis coordinate measurement machine Int. J. Comput. Integr. Manuf. 23 1071–81 |
| Bi Q Z, Wang Y H and Ding H 2010 A GPU-based algorithm for generating collision-free and orientation-smooth five-axis finishing tool paths of a ball-end cutter Int. J. Prod. Res. 48 1105–24 |
| Li W L, Wang G, Zhang G, Li Q D and Yin Z P 2017 Interference-free inspection path generation for impeller blades using an on-machine probe IEEE/ASME Trans. Mechatron. 22 1218–26 |
| Yi B W, Qiao F, Hua L, Wang X S, Wu S J and Huang N D 2022 Touch trigger probe-based interference-free inspection path planning for free-form surfaces by optimizing the probe posture IEEE Trans. Instrum. Meas. 71 1002108 |
| Limaiem A and EiMaraghy H A 2000 Integrated accessibility analysis and measurement operations sequencing for CMMs J. Manuf. Syst. 19 83–93 |
| Vafaeesefat A and Elmaraghy H A 2000 Automated accessibility analysis and measurement clustering for CMMs Int. J. Prod. Res. 38 2215–31 |
| Heo E Y, Kim D W, Lee J Y and Kim K Y 2008 Computer-aided measurement plan for an impeller on a coordinate measurement machine with a rotating and tilting probe Robot. Comput. Integr. Manuf. 24 788–95 |
| Mian S H and Al-Ahmari A 2014 Enhance performance of inspection process on coordinate measuring machine Measurement 47 78–91 |
| Salman R, Carlson J S, Ekstedt F, Spensieri D, Torstensson J and Söderberg R 2016 An industrially validated CMM inspection process with sequence constraints Proc. CIRP 44 138–43 |
| Zhang Y Q, Shen Y J, Zhang W Z, Zhang L, Zhu L M and Zhang Y 2022 Generation of efficient and interference-free scanning path for inspecting impeller on a cylindrical CMM Measurement 198 111352 |
| Shen Y J, Zhang W Z, Zhang Y Q, Huang N D, Zhang Y and Zhu L M 2022 Distributed particle swarm optimization for the planning of time-optimal and interference-free five-axis sweep scanning path IEEE Trans. Ind. Inf. 18 8703–13 |
| Zhang Y, Zhou Z and Tang K 2018 Sweep scan path planning for five-axis inspection of free-form surfaces Robot. Comput.-Integr. Manuf. 49 335–48 |
| Hu P C, Zhang R and Tang K 2017 Automatic generation of five-axis continuous inspection paths for free-form surfaces IEEE Trans. Autom. Sci. Eng. 14 83–97 |
| Hu P C, Zhou H C, Tang K, Lee C, Chen J H, Yang J Z and Li L 2018 Spiral curve-based efficient five-axis sweep scanning of barrel-shaped surfaces J. Manuf. Sci. Eng. 140 071001 |
| Chen L F, Zhang R, Tang K, Hu P C, Zhao P Y, Li Z Y and Han Z W 2020 A spiral-based inspection path generation algorithm for efficient five-axis sweep scanning of freeform surfaces Comput. -Aided Des. 124 102838 |
| Zhang Y, Shen Y J, Zhu L M, Huang N D and Hu P C 2022 Extracting skeletons of two-manifold triangular mesh surface for planning skeleton-guided five-axis surface inspection path J. Manuf. Sci. Eng. 144 121005 |
| Zhang Y and Tang K 2019 Automatic sweep scan path planning for five-axis free-form surface inspection based on hybrid swept area potential field IEEE Trans. Autom. Sci. Eng. 16 261–77 |
| Wan N, Jiang R Z, Zhao H and Zhang S T 2019 An inspection path optimization of impeller for balancing efficiency and accuracy Measurement 141 472–85 |
| Chen Y P, Gao J, Deng H X, Zheng D T, Chen X and Kelly R 2013 Spatial statistical analysis and compensation of machining errors for complex surfaces Precis. Eng. 37 203–12 |
| Li S M, Zeng L, Feng P F and Yu D W 2020 An accurate probe pre-travel error compensation model for five-axis on-machine inspection system Precis. Eng. 62 256–64 |
| Liu C Q, Li Y G and Hao X Z 2017 An adaptive machining approach based on in-process inspection of interim machining states for large-scaled and thin-walled complex parts Int. J. Adv. Manuf. Technol. 90 3119–28 |
| Bi Q Z, Wang X Z, Wu Q, Zhu L M and Ding H 2019 Fv-SVM-based wall-thickness error decomposition for adaptive machining of large skin parts IEEE Trans. Ind. Inf. 15 2426–34 |
| Zhao Z C, Xu T R and Fu Y C 2020 Profile and thickness constrained adaptive localization for manufacturing curved thin-walled parts based on on-machine measurement Int J. Adv. Manuf. Technol. 110 113–23 |
| Liu H B, Wang Y Q, Jia Z Y and Guo D M 2015 Integration strategy of on-machine measurement (OMM) and numerical control (NC) machining for the large thin-walled parts with surface correlative constraint Int J. Adv. Manuf. Technol. 80 1721–31 |
| Huang N D, Bi Q Z, Wang Y H and Sun C 2014 5-Axis adaptive flank milling of flexible thin-walled parts based on the on-machine measurement Int. J. Mach. Tools Manuf. 84 1–8 |
| Zhang Y, Chen Z T and Zhu Z Q 2020 Adaptive machining framework for the leading/trailing edge of near-net-shape integrated impeller Int. J. Adv. Manuf. Technol. 107 4221–9 |
| Zhao Z C, Ding D W, Fu Y C and Xu J H 2019 Measured data-driven shape-adaptive machining via spatial deformation of tool cutter positions Measurement 135 244–51 |
| Huang N D, Yin C H, Liang L, Hu J C and Wu S J 2018 Error compensation for machining of large thin-walled part with sculptured surface based on on-machine measurement Int. J. Adv. Manuf. Technol. 96 4345–52 |
| Hao X Z, Li Y G, Deng T C, Liu C Q and Xiang B F 2019 Tool path transplantation method for adaptive machining of large-sized and thin-walled free form surface parts based on error distribution Robot. Comput.-Integr. Manuf. 56 222–32 |
| Liang S R and Lin A C 2002 Probe-radius compensation for 3D data points in reverse engineering Comput. Ind. 48 241–51 |
| Liu J F, He X M, Zhang L, Huang X and Wang Y Z 2022 High precision measurement of blade profile curve using iterative normal vector approximation Meas. Sci. Technol. 33 075015 |
| Park J J, Kwon K and Cho N 2006 Development of a coordinate measuring machine (CMM) touch probe using a multi-axis force sensor Meas. Sci. Technol. 17 2380–6 |
| Rak A and Wó zniak A 2009 Probe radius correction methods—review and comparison of existing methods J. Autom. Mobile Rob. Intell. Syst. 3 169–71 |
| Lee R T and Shiou F J 2010 Calculation of the unit normal vector using the cross-curve moving mask method for probe radius compensation of a freeform surface measurement Measurement 43 469–78 |
| Shiou F J and Lin Y F 2002 Calculation of the normal vector using the 3×3 moving mask method for freeform surface measurement and its application Int. J. Adv. Manuf. Technol. 19 516–24 |
| Wójcik A, Niemczewska-Wójcik M and Sładek J 2017 Assessment of free-form surfaces’ reconstruction accuracy Metrol. Meas. Syst. 24 303–12 |
| Jiang R S, Wang W H, Zhang D H and Wang Z Q 2016 A practical sampling method for profile measurement of complex blades Measurement 81 57–65 |
| Kawalec A and Magdziak M 2017 The selection of radius correction method in the case of coordinate measurements applicable for turbine blades Precis. Eng. 49 243–52 |
| Wozniak A and Mayer J R R 2012 A robust method for probe tip radius correction in coordinate metrology Meas. Sci. Technol. 23 025001 |
| Wó zniak A, Mayer J R R and Bałazi´ nski M 2009 Stylus tip envelop method: corrected measured point determination in high definition coordinate metrology Int. J. Adv. Manuf. Technol. 42 505–14 |
| Wang Z Y, Zhang X, Shen Y J, Zhu L M and Besse S 2020 A novel 3D radius compensation method of probe stylus tip in the free-form surface profile curve scanning measurement Meas. Sci. Technol. 31 085001 |
| Li Y Q and Ni J 2009 Constraints based nonrigid registration for 2D blade profile reconstruction in reverse engineering J. Comput. Inf. Sci. Eng. 9 031005 |
| Bae S H and Choi B K 2002 NURBS surface fitting using orthogonal coordinate transform for rapid product development Comput. Aided Des. 34 683–90 |
| Gu T Q, Lin H X, Tang D W, Lin S W and Luo T Z 2021 Curve and surface reconstruction based on MTLS algorithm combined with k-means clustering Measurement 182 109737 |
| Zhu Z P, Zheng A Z, Iglesias A, Wang S B, Xia Y, Chaudhry E, You L H and Zhang J J 2022 PDE patch-based surface reconstruction from point clouds J. Comput. Sci. 61 101647 |
| Wang D S, Hassan O, Morgan K and Weatherill N 2006 Efficient surface reconstruction from contours based on two-dimensional Delaunay triangulation Int. J. Numer. Methods Eng. 65 734–51 |
| Zhao Z C, Fu Y C, Liu X, Xu J H, Wang J and Mao S J 2017 Measurement-based geometric reconstruction for milling turbine blade using free-form deformation Measurement 101 19–27 |
| Hoffmann M 2005 Numerical control of Kohonen neural network for scattered data approximation Numer. Algorithms 39 175–86 |
| Liu X Y and Feng F 2009 Constraint-based NURBS surfaces manipulation Proc. 2009 Int. Workshop on Intelligent Systems and Applications (Wuhan: IEEE) pp 1–4 |
| Lin F 2011 NURBS interpolation algorithm based on feedrate sensitive points identification Adv. Mater. Res. 383–390 2567–72 |
| Lin C T, Cheng W C and Liang S F 2005 Neural-network-based adaptive hybrid-reflectance model for 3D surface reconstruction IEEE Trans. Neural Netw. 16 1601–15 |
| Lu K Q and Wang W 2015 A multi-sensor approach for rapid and precise digitization of free-form surface in reverse engineering Int. J. Adv. Manuf. Technol. 79 1983–94 |
| Hu S M, Li Y F, Ju T and Zhu X 2001 Modifying the shape of NURBS surfaces with geometric constraints Comput. -Aided Des. 33 903–12 |
| Pourazady M and Xu X 2006 Direct manipulations of NURBS surfaces subjected to geometric constraints Comput. Graph. 30 598–609 |
| Lai J T, Fu J Z, Shen H Y, Gan W F and Chen Z C 2015 Machining error inspection of T-spline surface by on-machine measurement Int. J. Precis. Eng. Manuf. 16 433–9 |
| Yi B W, Liang R B, Wang X S, Wu S J and Huang N D 2022 Free-form surface form error evaluation based on smaller-scale sampling points in touch-trigger probing Precis. Eng. 76 255–60 |
| Ren J J, Jian Z X, Wang X, Ren M J, Zhu L M and Jiang X Q 2021 Complex surface reconstruction based on fusion of surface normals and sparse depth measurement IEEE Trans. Instrum. Meas. 70 2506413 |
| Wen P Z, Wu X J, Zhu Y and Peng X W 2009 LS-RBF network based 3D surface reconstruction method Proc. 2009 Chinese Control and Decision Conf. (Guilin: IEEE) pp 5785–9 |
| Yoo D J 2010 Rapid surface reconstruction from a point cloud using the least-squares projection Int. J. Precis. Eng. Manuf. 11 273–83 |
| Zhu D Z and Smith W A P 2020 Least squares surface reconstruction on arbitrary domains Proc. 16th European Conf. on Computer Vision (Glasgow: Springer) pp 530–45 |
| Bae E and Weickert J 2010 Partial differential equations for interpolation and compression of surfaces Proc. 7th Int. Conf. on Mathematical Methods for Curves and Surfaces (Tønsberg: Springer) pp 1–14 |
| Zhao H K, Osher S and Fedkiw R 2001 Fast surface reconstruction using the level set method Proc. IEEE Workshop on Variational and Level Set Methods in Computer Vision (Vancouver, BC: IEEE) pp 194–201 |
| Zou Q 2020 A PDE model for smooth surface reconstruction from 2D parallel slices IEEE Signal Process. Lett. 27 1015–9 |
| Wang S B, Xia Y, You L H and Zhang J J 2023 PDE-based surface reconstruction in automotive styling design Multimedia Tools Appl. 82 1185–202 |
| LeCun Y, Bengio Y and Hinton G 2015 Deep learning Nature 521 436–44 |
| Wang J J, Ma Y L, Zhang L B, Gao R X and Wu D Z 2018 Deep learning for smart manufacturing: methods and applications J. Manuf. Syst. 48 144–56 |
| Dong C, Loy C C, He K M and Tang X O 2014 Learning a deep convolutional network for image super-resolution Proc. 13th European Conf. on Computer Vision (Zurich: Springer) pp 184–99 |
| Dong C, Loy C C and Tang X O 2016 Accelerating the super-resolution convolutional neural network Proc. 14th European Conf. on Computer Vision (Amsterdam: Springer) pp 391–407 |
| Shi W Z, Caballero J, Huszár F, Totz J, Aitken A P, Bishop R, Rueckert D and Wang Z H 2016. Real-time single image and video super-resolution using an efficient sub-pixel convolutional neural network Proc. 2016 IEEE Conf. on Computer Vision and Pattern Recognition (Las Vegas, NV: IEEE) pp 1874–83 |
| Kim J, Lee J K and Lee K M 2016 Accurate image super-resolution using very deep convolutional networks Proc. 2016 IEEE Conf. on Computer Vision and Pattern Recognition (Las Vegas, NV: IEEE) pp 1646–54 |
| Kim J, Lee J K and Lee K M 2016 Deeply-recursive convolutional network for image super-resolution Proc. 2016 IEEE Conf. on Computer Vision and Pattern Recognition (Las Vegas, NV: IEEE) pp 1637–45 |
| Ledig C et al 2017 Photo-realistic single image super-resolution using a generative adversarial network Proc. 2017 IEEE Conf. on Computer Vision and Pattern Recognition (Honolulu, HI: IEEE) pp 4681–90 |
| Tai Y, Yang J and Liu X M 2017 Image super-resolution via deep recursive residual network Proc. 2017 IEEE Conf. on Computer Vision and Pattern Recognition (Honolulu, HI: IEEE) pp 3147–55 |
| Lim B, Son S, Kim H, Nah S and Lee K M 2017 Enhanced deep residual networks for single image super-resolution Proc. 2017 IEEE Conf. on Computer Vision and Pattern Recognition Workshops (Honolulu, HI: IEEE) pp 136–44 |
| Tong T, Li G, Liu X J and Gao Q Q 2017 Image super-resolution using dense skip connections Proc. 2017 IEEE Int. Conf. on Computer Vision (Venice: IEEE) pp 4799–807 |
| Hu X C, Mu H Y, Zhang X Y, Wang Z L, Tan T N and Sun J 2019 Meta-SR: a magnification-arbitrary network for super-resolution Proc. 2019 IEEE/CVF Conf. on Computer Vision and Pattern Recognition (Long Beach, CA: IEEE) pp 1575–84 |
| Chen Y B, Liu S F and Wang X L 2021 Learning continuous image representation with local implicit image function Proc. 2021 IEEE/CVF Conf. on Computer Vision and Pattern Recognition (Nashville, TN: IEEE) pp 8628–38 |
| Yu L Q, Li X Z, Fu C W, Cohen-Or D and Heng P A 2018 PU-Net: point cloud upsampling network Proc. 2018 IEEE/CVF Conf. on Computer Vision and Pattern Recognition (Salt Lake City, UT: IEEE) pp 2790–9 |
| Yu L Q, Li X Z, Fu C W, Cohen-Or D and Heng P A 2018 EC-Net: an edge-aware point set consolidation network Proc. 15th European Conf. on Computer Vision (Munich: Springer) pp 398–414 |
| Wang Y F, Wu S H, Huang H, Cohen-Or D and Sorkine-Hornung O 2019 Patch-based progressive 3D point set upsampling Proc. 2019 IEEE/CVF Conf. on Computer Vision and Pattern Recognition (Long Beach, CA: IEEE) pp 5958–67 |
| Li R H, Li X Z, Fu C W, Cohen-Or D and Heng P A 2019 PU-GAN: a point cloud upsampling adversarial network Proc. 2019 IEEE/CVF Int. Conf. on Computer Vision (Seoul: IEEE) pp 7203–12 |
| Qian Y, Hou J H, Kwong S and He Y 2020 PUGeo-Net: a geometry-centric network for 3D point cloud upsampling Proc. 16th European Conf. on Computer Vision (Glasgow: Springer) pp 752–69 |
| Yuan W T, Khot T, Held D, Mertz C and Hebert M 2018 PCN: point completion network Proc. 2018 Int. Conf. on 3D Vision (Verona: IEEE) pp 728–37 |
| Qian G C, Abualshour A, Li G H, Thabet A and Ghanem B 2021 PU-GCN: point cloud upsampling using graph convolutional networks Proc. 2021 IEEE/CVF Conf. on Computer Vision and Pattern Recognition (Nashville, TN: IEEE) pp 11683–92 |
| Li R H, Li X Z, Heng P A and Fu C W 2021 Point cloud upsampling via disentangled refinement Proc. 2021 IEEE/CVF Conf. on Computer Vision and Pattern Recognition (Nashville, TN: IEEE) pp 344–53 |
| Qian Y, Hou J H, Kwong S and He Y 2021 Deep magnification-flexible upsampling over 3D point clouds IEEE Trans. Image Process. 30 8354–67 |
| Zhao W B, Liu X M, Zhong Z W, Jiang J J, Gao W, Li G and Ji X Y 2022. Self-supervised arbitrary-scale point clouds upsampling via implicit neural representation Proc. 2022 IEEE/CVF Conf. on Computer Vision and Pattern Recognition (New Orleans, LA: IEEE) pp 1989–97 |
| Ye S Q, Chen D D, Han S F, Wan Z Y and Liao J 2022 Meta-PU: an arbitrary-scale upsampling network for point cloud IEEE Trans. Vis. Comput. Graph. 28 3206–18 |
| ISO 1101:2017 2017 Geometrical product specifications (GPS)—geometrical tolerancing—tolerances of form, orientation, location and run-out (available at: www.iso. org/standard/66777.html) |
| Wen X L and Song A G 2003 An improved genetic algorithm for planar and spatial straightness error evaluation Int. J. Mach. Tools Manuf. 43 1157–62 |
| Pathak V K and Singh A K 2017 Form error evaluation of noncontact scan data using constriction factor particle swarm optimization J. Adv. Manuf. Syst. 16 205–26 |
| Zhu L M, Xiong Z H, Ding H and Xiong Y L 2004 A distance function based approach for localization and profile error evaluation of complex surface J. Manuf. Sci. Eng. 126 542–54 |
| He G Y, Zhang M and Song Z J 2015 Error evaluation of free-form surface based on distance function of measured point to surface Comput. -Aided Des. 65 11–17 |
| Lang A L, Song Z J, He G Y and Sang Y C 2017 Profile error evaluation of free-form surface using sequential quadratic programming algorithm Precis. Eng. 47 344–52 |
| Gu P and Chan K 1996 Generative inspection process and probe path planning for coordinate measuring machines J. Manuf. Syst. 15 240–55 |
| Li Y D and Gu P H 2004 Free-form surface inspection techniques state of the art review Comput. -Aided Des. 36 1395–417 |
| Vrba I, Palencar R, Hadzistevic M, Strbac B, Spasic-Jokic V and Hodolic J 2015 Different approaches in uncertainty evaluation for measurement of complex surfaces using coordinate measuring machine Meas. Sci. Rev. 15 111–8 |
| Forbes A B, Mengot A and Jonas K 2015 Uncertainty associated with coordinate measurement in comparator mode Proc. Laser Metrology and Machine Performance XI (Huddersfield: University of Huddersfield) pp 150–9 |
| Feng C X J, Saal A L, Salsbury J G, Ness A R and Lin G C S 2007 Design and analysis of experiments in CMM measurement uncertainty study Precis. Eng. 31 94–101 |
| Wilhelm R G, Hocken R and Schwenke H 2001 Task specific uncertainty in coordinate measurement CIRP Ann. 50 553–63 |
| Hocken R J and Pereira P H 2012 Coordinate Measuring Machines and Systems 2nd edn (Boca Raton, FL: CRC Press) (https://doi.org/10.1201/b11022) |
| Sato O, Takatsuji T and Balsamo A 2022 Practical experimental design of task-specific uncertainty evaluation for coordinate metrology Advanced Mathematical and Computational Tools in Metrology and Testing XII ed F Pavese, A B Forbes, N F Zhang and A G Chunovkina (Hackensack, NJ: World Scientific) (https://doi.org/ 10.1142/9789811242380_0023) |
| Valdez M O and Morse E P 2017 The role of extrinsic factors in industrial task-specific uncertainty Precis. Eng. 49 78–84 |
| Valdez M O 2015 Task-specific uncertainty for industrial measurements Doctoral Dissertation Thesis The University of North Carolina |
| Joint Committee for Guides in Metrology 2008 JCGM 100 Evaluation of Measurement Data—Guide to the Expression of Uncertainty in Measurement (JCGM) pp 1–116 |
| Papananias M 2018 Combined numerical and statistical modelling for in-depth uncertainty evaluation of comparative coordinate measurement Doctoral Thesis University of Portsmouth |
| Mussatayev M, Huang M F and Beshleyev S 2020 Thermal influences as an uncertainty contributor of the coordinate measuring machine (CMM) Int. J. Adv. Manuf. Technol. 111 537–47 |
| Barini E M, Tosello G and De Chiffre L 2010 Uncertainty analysis of point-by-point sampling complex surfaces using touch probe CMMs: DOE for complex surfaces verification with CMM Precis. Eng. 34 16–21 |
| Strbac B, Acko B, Havrli san S, Matin I, Savković B and Had zistević M 2020 Investigation of the effect of temperature and other significant factors on systematic error and measurement uncertainty in CMM measurements by applying design of experiments Measurement 158 107692 |
| ISO/TS 15530-3:2004 2004 Geometrical product specifications (GPS)—Coordinate measuring machines (CMM): technique for determining the uncertainty of measurement—Part 3: use of calibrated workpieces or standards (available at: www.iso.org/standard/38695. html) |
| Forbes A B, Papananias M, Longstaff A P, Fletcher S, Mengot A and Jonas K 2016 Developments in automated flexible gauging and the uncertainty associated with comparative coordinate measurement Proc. 16th Int. Conf. of the European Society for Precision Engineering and Nanotechnology (Nottingham: European society for precision engineering and nanotechnology) (availabel at: www.euspen.eu/events/ 16th-international-conference-exhibition/) |
| Papananias M, Fletcher S, Longstaff A P, Mengot A, Jonas K and Forbes A B 2017 Modelling uncertainty associated with comparative coordinate measurement through analysis of variance techniques Proc. 17th Int. Conf. European Society for Precision Engineering and Nanotechnology (Hannover, Germany) (available at: www.euspen.eu/events/17th-international-conferenceexhibition/) |
| Kruth J P, Van Gestel N, Bleys P and Welkenhuyzen F 2009 Uncertainty determination for CMMs by Monte Carlo simulation integrating feature form deviations CIRP Ann. 58 463–6 |
| Peggs G 2003 Virtual technologies for advanced manufacturing and metrology Int. J. Comput. Integr. Manuf. 16 485–90 |
| Haitjema H, van Dorp B W, Morel M and Schellekens P H J 2001 Uncertainty estimation by the concept of virtual instruments Proc. SPIE 4401 147–57 |
| Gaşka P, Gaşka A, Sładek J and Je˛drzejewski J 2019 Simulation model for uncertainty estimation of measurements performed on five-axis measuring systems Int. J. Adv. Manuf. Technol. 104 4685–96 |
| Mian S H and Al-Ahmari A 2014 New developments in coordinate measuring machines for manufacturing industries Int. J. Metrol. Qual. Eng. 5 101 |
| Sładek J, Gaşka A, Olszewska M, Kupiec R and Krawczyk M 2013 Virtual coordinate measuring machine built using lasertracer system and spherical standard Metrol. Meas. Syst. 20 77–86 |
| Gaşka A, Gaşka P and Gruza M 2016 Simulation model for correction and modeling of probe head errors in five-axis coordinate systems Appl. Sci. 6 144 |
| Gaşka A, Harmatys W, Gaşka P, Gruza M, Gromczak K and Ostrowska K 2017 Virtual CMM-based model for uncertainty estimation of coordinate measurements performed in industrial conditions Measurement 98 361–71 |
| ISO/TS 15530-4:2008 2008 Geometrical product specifications (GPS)—Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement—Part 4: evaluating task-specific measurement uncertainty using simulation (available at: www.iso.org/standard/38696.html) |
| Gawlikowski J et al 2021 A survey of uncertainty in deep neural networks (arXiv:2107.03342) |
| Kendall A G 2019 Geometry and Uncertainty in Deep Learning for Computer Vision (Cambridge: University of Cambridge) |
| Gal Y 2016 Uncertainty in Deep Learning (Cambridge: University of Cambridge) |
| Kendall A and Gal Y 2017 What uncertainties do we need in Bayesian deep learning for computer vision? Proc. 31st Int. Conf. on Neural Information Processing Systems (Long Beach, CA: Curran Associates Inc.) pp 5580–90 (available at: https://proceedings.neurips.cc/paper_files/ paper/2017/file/2650d6089a6d640c5e85b2b88265dc2bPaper.pdf) |
| Lee J, Bahri Y, Novak R, Schoenholz S S, Pennington J and Sohl-Dickstein J 2018 Deep neural networks as Gaussian processes Proc. 6th Int. Conf. on Learning Representations (Vancouver, BC: OpenReview.net) (https://doi.org/10.48550/arXiv.1711.00165) |
| Garnelo M, Schwarz J, Rosenbaum D, Viola F, Rezende D J, Eslami S M A and Teh Y W 2018 Neural processes (arXiv:1807.01622) |
| Garnelo M, Rosenbaum D, Maddison C, Ramalho T, Saxton D, Shanahan M, Teh Y W, Rezende D J and Eslami S M A 2018 Conditional neural processes Proc. 35th Int. Conf. on Machine Learning (Stockholm: PMLR, Stockholmsmässan) pp 1690–9 (available at: https://proceedings.mlr.press/v80/garnelo 18a.html) |
| Kim H, Mnih A, Schwarz J, Garnelo M, Eslami S M A, Rosenbaum D, Vinyals O and Teh Y W 2019 Attentive neural processes Proc. 7th Int. Conf. on Learning Representations (New Orleans, LA: OpenReview.net) (https://doi.org/10.48550/arXiv.1901.05761) |
| Li J Z, Ren J J, Ren M J, Zheng Y and Le X Y 2022 Neural process enhanced machining error evaluation for coordinate measuring machines IEEE Trans. Instrum. Meas. 71 2514512 |
| Papananias M, Fletcher S, Longstaff A P and Mengot A 2016 A novel method based on Bayesian regularized artificial neural networks for measurement uncertainty evaluation Proc. 16th Int. Conf. European Society for Precision Engineering and Nanotechnology (Nottingham, UK) (https://doi.org/10.13140/RG.2.1.1773.7840) |
| Gao W, Haitjema H, Fang F Z, Leach R K, Cheung C F, Savio E and Linares J M 2019 On-machine and in-process surface metrology for precision manufacturing CIRP Ann. 68 843–66 |
| Huang N D, Zhang S K, Bi Q Z and Wang Y H 2016 Identification of geometric errors of rotary axes on 5-axis machine tools by on-machine measurement Int. J. Adv. Manuf. Technol. 84 505–12 |
| Ibaraki S, Inui H, Hong C F, Nishikawa S and Shimoike M 2019 On-machine identification of rotary axis location errors under thermal influence by spindle rotation Precis. Eng. 55 42–47 |
.f24a2748-f6a9-46e6-ba0c-19e9a2a1346b.png)
DownLoad: