Laser-based bionic manufacturing

Xingran Li; Baoyu Zhang; Timothy Jakobi; Zhenglei Yu; Luquan Ren; Zhihui Zhang

doi:10.1088/2631-7990/ad3f59

Over millions of years of natural evolution, organisms have developed nearly perfect structures and functions. The self-fabrication of organisms serves as a valuable source of inspiration for designing the next-generation of structural materials, and is driving the future paradigm shift of modern materials science and engineering. However, the complex structures and multifunctional integrated optimization of organisms far exceed the capability of artificial design and fabrication technology, and new manufacturing methods are urgently needed to achieve efficient reproduction of biological functions. As one of the most valuable advanced manufacturing technologies of the 21st century, laser processing technology provides an efficient solution to the critical challenges of bionic manufacturing. This review outlines the processing principles, manufacturing strategies, potential applications, challenges, and future development outlook of laser processing in bionic manufacturing domains. Three primary manufacturing strategies for laser-based bionic manufacturing are elucidated: subtractive manufacturing, equivalent manufacturing, and additive manufacturing. The progress and trends in bionic subtractive manufacturing applied to micro/nano structural surfaces, bionic equivalent manufacturing for surface strengthening, and bionic additive manufacturing aiming to achieve bionic spatial structures, are reported. Finally, the key problems faced by laser-based bionic manufacturing, its limitations, and the development trends of its existing technologies are discussed.

HTML

Reference (122)

Han Z W, Mu Z Z, Yin W, Li W, Niu S C, Zhang J Q and Ren L Q 2016 Biomimetic multifunctional surfaces inspired from animals Adv. Colloid Interface Sci. 234 27-50

Liu Z Q, Meyers M A, Zhang Z F and Ritchie R O 2017 Functional gradients and heterogeneities in biological materials: design principles, functions, and bioinspired applications Prog. Mater. Sci. 88 467-98

Yan X T, Jin Y K, Chen X M, Zhang C, Hao C L and Wang Z K 2020 Nature-inspired surface topography: design and function Sci. China Phys. Mech. Astron. 63 224601

Zhang C Q, Mcadams II D A and Grunlan J C 2016 Nano/micro-manufacturing of bioinspired materials: a review of methods to mimic natural structures Adv. Mater. 28 6292-321

Wang X Y, Yang X B, Zhao J W, Pei X, Su H H, Wang T M and Hou T G 2023 Aquatic unmanned aerial vehicles (AquaUAV): bionic prototypes, key technologies, analysis methods, and potential solutions Sci. China Technol. Sci. 66 2308-31

Velasco-Hogan A, Xu J and Meyers M A 2018 Additive manufacturing as a method to design and optimize bioinspired structures Adv. Mater. 30 1800940

Tao G C, Zhang J H, Shen X H, Bai L J, Ma C and Wang J J 2016 Feasibility study on ultrasonic vibration assisted milling for squamous surface Proc. CIRP 42 847-52

Li H, Peng Y J, Xin L, Li P C, Shao Y L, Zhang Z H and Ren L Q 2023 Bionic eco-friendly synergic anti-scaling Cu-Zn-CeO₂ coating on steel substrate functionalized by multi-scale structures and heating enhanced adsorption Mater. Des. 232 112109

Shao Y L, Du W B, Fan Y, Zhao J, Zhang Z H and Ren L Q 2022 Near-infrared light accurately controllable superhydrophobic surface from water sticking to repelling Chem. Eng. J. 427 131718

Zhao L M, Chen R R, Liu J Y, Liu Q, Yu J, Zhu J H, Liu P L and Wang J 2023 Layer-by-layer-assembled biomimetic microstructure surface with multiple synergistic antifouling performance Prog. Org. Coat. 183 107812

Sun N, Shan H Y, Zhou H, Chen D R and Ren L Q 2012 Adhesion resistance surfaces against clay resulting from biomimetic adaptation Surf. Coat. Technol. 206 3559-65

Xing D H, Chen W Y, Zhao L and Ma J F 2012 Structural bionic design for high-speed machine tool working table based on distribution rules of leaf veins Sci. China Technol. Sci. 55 2091-8

Akbari R, Godeau G, Mohammadizadeh M, Guittard F and Darmanin T 2019 Wetting transition from hydrophilic to superhydrophobic over dendrite copper leaves grown on steel meshes J. Bionic Eng. 16 719-29

Chen X H, Kong L H, Dong D, Yang G B, Yu L G, Chen J M and Zhang P Y 2009 Fabrication of functionalized copper compound hierarchical structure with bionic superhydrophobic properties J. Phys. Chem. C 113 5396-401

Cheng W, Zeng X W, Chen H Z, Li Z M, Zeng W F, Mei L and Zhao Y L 2019 Versatile polydopamine platforms: synthesis and promising applications for surface modification and advanced nanomedicine ACS Nano 13 8537-65

An W, Ma J Z and Xu Q N 2021 Bio-template synthesis of MgAl layered double hydroxide with enhanced flame retardant property for leather finishes Appl. Surf. Sci. 551 149409

Pu X, Li G J, Huang H H, Liu Y H and Ashraf M A 2018 Using bio-replicated forming technologies to fabricate shark-skin surface Braz. Arch. Biol. Technol. 60 e17160511

Chen Y Y, Feng Y M, Deveaux J G, Masoud M A, Chandra F S, Chen H W, Zhang D Y and Feng L 2019 Biomineralization forming process and bio-inspired nanomaterials for biomedical application: a review Minerals 9 68

Han X, Zhang D Y, Li X and Li Y Y 2008 Bio-replicated forming of the biomimetic drag-reducing surfaces in large area based on shark skin Chin. Sci. Bull. 53 1587-92

Moroni L et al 2018 Biofabrication: a guide to technology and terminology Trends Biotechnol. 36 384-402

Majumdar J D and Manna I 2011 Laser material processing Int. Mater. Rev. 56 341-88

Lin Y T, Wu C H, Syu W L, Ho P C, Tseng Z L, Yang M C, Lin C C, Chen C C, Chen C C and Liu T Y 2022 Replica of bionic nepenthes peristome-like and anti-fouling structures for self-driving water and Raman-enhancing detection Polymers 14 2465

Emmelmann C, Petersen M, Kranz J and Wycisk E 2011 Bionic lightweight design by laser additive manufacturing (LAM) for aircraft industry Proc. SPIE 8065 80650L

Xing Y Q, Luo C, Wan Y Z, Huang P, Wu Z and Zhang K D 2021 Formation of bionic surface textures composed by micro-channels using nanosecond laser on Si₃N₄-based ceramics Ceram. Int. 47 12768-79

Yong J L, Yang Q, Hou X and Chen F 2022 Nature-inspired superwettability achieved by femtosecond lasers Ultrafast Sci. 2022 9895418

Zhang Y Y, Jiao Y L, Li C Z, Chen C, Li J W, Hu Y L, Wu D and Chu J R 2020 Bioinspired micro/nanostructured surfaces prepared by femtosecond laser direct writing for multi-functional applications Int. J. Extrem. Manuf. 2 032002

Zhang P P, Li F H, Zhang X F, Zhang Z H, Zhou F F, Ren L Q and Liu M 2019 Thermal shock resistance of thermal barrier coatings with different surface shapes modified by laser remelting J. Therm. Spray Technol. 28 417-32

Riva L, Ginestra P S and Ceretti E 2021 Mechanical characterization and properties of laser-based powder bed-fused lattice structures: a review Int. J. Adv. Manuf. Technol. 113 649-71

Wu P C, Cao X W, Zhao L, Chen Z H, Zhang M N, Juodkazis S and Zhang W W 2021 Dynamic structural color display based on femtosecond laser variable polarization processing Adv. Mater. Interfaces 8 2100460

Linklater D P, Juodkazis S and Ivanova E P 2017 Nanofabrication of mechano-bactericidal surfaces Nanoscale 9 16564-85

Žemaitis A, Mikšys J, Gaidys M, Gečys P and Gedvilas M 2019 High-efficiency laser fabrication of drag reducing riblet surfaces on pre-heated Teflon Mater. Res. Express 6 065309

Han J P, Cai M Y, Lin Y, Liu W J, Luo X, Zhang H J, Wang K Y and Zhong M L 2018 Comprehensively durable superhydrophobic metallic hierarchical surfaces via tunable micro-cone design to protect functional nanostructures RSC Adv. 8 6733-44

Su W, Zhou T, Zhang P, Zhou H and Li H 2018 Effect of distribution of striated laser hardening tracks on dry sliding wear resistance of biomimetic surface Opt. Laser Technol. 98 281-90

Zhang Q Q, Hao S J, Liu Y T, Xiong Z W, Guo W Q, Yang Y, Ren Y, Cui L S, Ren L Q and Zhang Z H 2020 The microstructure of a selective laser melting (SLM)-fabricated NiTi shape memory alloy with superior tensile property and shape memory recoverability Appl. Mater. Today 19 100547

Wang R, Gu D D, Lin K J, Chen C Y, Ge Q and Li D L 2022 Multi-material additive manufacturing of a bio-inspired layered ceramic/metal structure: formation mechanisms and mechanical properties Int. J. Mach. Tools Manuf. 175 103872

Pham M S, Liu C, Todd I and Lertthanasarn J 2019 Damage-tolerant architected materials inspired by crystal microstructure Nature 565 305-11

Orazi L, Siciliani V, Pelaccia R, Oubellaouch K and Reggiani B 2022 Ultrafast laser micromanufacturing of microfluidic devices Proc. CIRP 110 122-7

Fermann M and Hartl I 2013 Ultrafast fibre lasers Nat. Photon. 7 868-74

Sassmannshausen A, Brenner A and Finger J 2021 Ultrashort pulse laser polishing by continuous surface melting J. Mater. Process. Technol. 293 117058

Zhang J Z, Zhang Y C, Yong J L, Hou X and Chen F 2022 Femtosecond laser direct weaving bioinspired superhydrophobic/hydrophilic micro-pattern for fog harvesting Opt. Laser Technol. 146 107593

Erkızan S N, Idikut F, Demirtas¸ Ö, Goodarzi A, Demir A K, · Borra M, Pavlov I and Bek A 2022 LIPSS for SERS: metal coated direct laser written periodic nanostructures for surface enhanced Raman spectroscopy Adv. Opt. Mater. 10 2200233

Jiang D F, Fan P X, Gong D W, Long J Y, Zhang H J and Zhong M L 2016 High-temperature imprinting and superhydrophobicity of micro/nano surface structures on metals using molds fabricated by ultrafast laser ablation J. Mater. Process. Technol. 236 56-63

Feng L, Wang F, Luo H J and Qiu B X 2023 Review of recent advancements in the biomimicry of structural colors Dyes Pigm. 210 111019

Han J P, Cai M Y, Lin Y, Liu W J, Luo X, Zhang H J and Zhong M L 2018 3D re-entrant nanograss on microcones for durable superamphiphobic surfaces via laser-chemical hybrid method Appl. Surf. Sci. 456 726-36

Li G Q, Li J W, Zhang C C, Hu Y L, Li X H, Chu J R, Huang W C and Wu D 2015 Large-area one-step assembly of three-dimensional porous metal micro/nanocages by ethanol-assisted femtosecond laser irradiation for enhanced antireflection and hydrophobicity ACS Appl. Mater. Interfaces 7 383-90

Huang J X, Xu K, Xu S L, Li X W and Wei Q H 2022 Self-aligned laser-induced periodic surface structures for large-area controllable nanopatterning Laser Photon. Rev. 16 2200093

Zhang H, Colombier J P, Li C, Faure N, Cheng G H and Stoian R 2015 Coherence in ultrafast laser-induced periodic surface structures Phys. Rev. B 92 174109

Shao Y L et al 2022 Precise controlling of friction and adhesion on reprogrammable shape memory micropillars ACS Appl. Mater. Interfaces 14 17995-8003

Ma Z C, Li C H, Hu X Y, Han B, Zhang Y L, Chen Q D and Sun H B 2020 Laser fabrication of bioinspired graphene surfaces with superwettability Front. Chem. 8 525

Wang S T, Liu K S, Yao X and Jiang L 2015 Bioinspired surfaces with superwettability: new insight on theory, design, and applications Chem. Rev. 115 8230-93

Wang Z L, Yin Q, Zhan Z H, Li W H, Xie M Z, Duan H G, Cheng P, Zhang C, Chen Y P and Dong Z C 2023 Bionic microchannels for step lifting transpiration Int. J. Extrem. Manuf. 5 025502

Liu W J, Fan P X, Cai M Y, Luo X, Chen C H, Pan R, Zhang H J and Zhong M L 2019 An integrative bioinspired venation network with ultra-contrasting wettability for large-scale strongly self-driven and efficient water collection Nanoscale 11 8940-9

Wang M, Liu Q, Zhang H R, Wang C, Wang L, Xiang B X, Fan Y T, Guo C F and Ruan S C 2017 Laser direct writing of tree-shaped hierarchical cones on a superhydrophobic film for high-efficiency water collection ACS Appl. Mater. Interfaces 9 29248-54

Wang J N, Liu Y Q, Zhang Y L, Feng J, Wang H, Yu Y H and Sun H B 2018 Wearable superhydrophobic elastomer skin with switchable wettability Adv. Funct. Mater. 28 1800625

Xuan S S et al 2023 Trifolium repens L.-like periodic micronano structured superhydrophobic surface with ultralow ice adhesion for efficient anti-icing/deicing ACS Nano 17 21749-60

Chowdhury H, Islam R, Hussein M, Zaid M, Loganathan B and Alam F 2019 Design of an energy efficient car by biomimicry of a boxfish Energy Proc. 160 40-44

Luo Y H 2015 Recent progress in exploring drag reduction mechanism of real sharkskin surface: a review J. Mech. Med. Biol. 15 1530002

Kim J and Kim C J 2002 Nanostructured surfaces for dramatic reduction of flow resistance in droplet-based microfluidics Proc. Technical Digest. MEMS 2002 IEEE Int. Conf. 15th IEEE Int. Conf. on Micro Electro Mechanical Systems (IEEE) pp 479-82

Sun K, Yang H, Xue W, Cao M H, Adeyemi K and Cao Y 2018 Tunable bubble assembling on a hybrid superhydrophobic-superhydrophilic surface fabricated by selective laser texturing Langmuir 34 13203-9

Yin K, Dong X R, Zhang F, Wang C and Duan J A 2017 Superamphiphobic miniature boat fabricated by laser micromachining Appl. Phys. Lett. 110 121909

Dai R Y et al 2022 A droplet-driven micro-surfboard with dual gradients for programmable motion Chem. Eng. J. 446 136874

Yang K, Shi J R, Wang L, Chen Y Z, Liang C Y, Yang L and Wang L N 2022 Bacterial anti-adhesion surface design: surface patterning, roughness and wettability: a review J. Mater. Sci. Technol. 99 82-100

Du C Z, Wang C Y, Zhang T, Yi X, Liang J Y and Wang H J 2020 Reduced bacterial adhesion on zirconium-based bulk metallic glasses by femtosecond laser nanostructuring Proc. Inst. Mech. Eng. H 234 387-97

Richter A M, Buchberger G, Stifter D, Duchoslav J, Hertwig A, Bonse J, Heitz J and Schwibbert K 2021 Spatial period of laser-induced surface nanoripples on PET determines Escherichia coli repellence Nanomaterials 11 3000

Pogodin S et al 2013 Biophysical model of bacterial cell interactions with nanopatterned cicada wing surfaces Biophys. J. 104 835-40

Selvamani V et al 2020 Hierarchical micro/mesoporous copper structure with enhanced antimicrobial property via laser surface texturing Adv. Mater. Interfaces 7 1901890

Yong J L, Huo J L, Yang Q, Chen F, Fang Y, Wu X J, Liu L, Lu X Y, Zhang J Z and Hou X 2018 Femtosecond laser direct writing of porous network microstructures for fabricating super-slippery surfaces with excellent liquid repellence and anti-cell proliferation Adv. Mater. Interfaces 5 1701479

Chen H W, Zhang P F, Zhang L W, Liu H L, Jiang Y, Zhang D Y, Han Z W and Jiang L 2016 Continuous directional water transport on the peristome surface of Nepenthes alata Nature 532 85-89

Liu Y, Jiang L, Li X W, Yi P, Huang J, Ye Y X and Wang Z P 2023 Single-pixel-adjustable structural color fabricated using a spatially modulated femtosecond laser ACS Appl. Mater. Interfaces 15 49805-13

Li Y H, Zhang X Y, Zou T T, Mu Q Q and Yang J J 2022 Vivid structural color macropatterns created by flexible nanopainting of ultrafast lasers ACS Appl. Mater. Interfaces 14 21758-67

Geng J, Xu L Y, Yan W, Shi L P and Qiu M 2023 High-speed laser writing of structural colors for full-color inkless printing Nat. Commun. 14 565

Yin J B, Yan H P, Dunzhu G S, Wang R, Cao S Z, Zhou R and Li Y Z 2022 General strategy toward laser single-step generation of multiscale anti-reflection structures by marangoni effect Micromachines 13 1491

Li Z X, Yin L, Jiang S Y, Chen L, Sang S T and Zhang H F 2023 A photocatalytic degradation self-cleaning composite membrane for oil-water separation inspired by light-trapping effect of moth-eye J. Memb. Sci. 669 121337

Di J et al 2022 Progress in laser surface modification technology of titanium alloy J. Phys.: Conf. Ser. 2346 012011

Palma T, Munther M, Sharma M, Hackel L, Beheshti A and Davami K 2019 Nanomechanical characterization of laser peened additively manufactured inconel 718 superalloy Adv. Eng. Mater. 21 1900499

Tian X M, Han Z W, Li X J, Pu Z G and Ren L Q 2010 Biological coupling anti-wear properties of three typical molluscan shells—Scapharca subcrenata, Rapana venosa and Acanthochiton rubrolineatus Sci. China Technol. Sci. 53 2905-13

Zhou H, Guo Q C, Lin P Y, Zhang W, Zhang X L and Ren L Q 2008 Influence of H13 steel unit on wear behavior of vermicular cast iron Appl. Surf. Sci. 255 3394-9

Wang H J, Qiu H N, Liu W, Tian L L, Zheng J, Zhang Z H and Zhou Z R 2023 Anti-wear properties of multi-bioinspired textures with hierarchical and superhydrophobic structures under water lubrication Wear 532-533 205124

Pang Z B, Zhou H, Chang F, Zhang P, Cong D L, Meng C, Wang C W and Ren L Q 2015 Effect of the microhardness difference between base metal and bionic coupling unit on wear resistance of gray cast iron Opt. Laser Technol. 75 151-6

Su W, Zhou T, Zhang P, Zhou H, Li H and Sui Q 2018 Effect of the orientation of laser stripes on the abrasion resistance of biomimetic laser textured surfaces Opt. Laser Technol. 107 380-8

Meng C, Zhou H, Cong D L, Wang C W, Zhang P, Zhang Z H and Ren L Q 2012 Effect of biomimetic non-smooth unit morphology on thermal fatigue behavior of H13 hot-work tool steel Opt. Laser Technol. 44 850-9

Tong X, Zhou H, Jiang W, Chen W W, Li X Z, Ren L Q and Zhang Z H 2009 Study on preheating and annealing treatments to biomimetic non-smooth cast iron sample with high thermal fatigue resistance Mater. Sci. Eng. A 513-514 294-301

Yuan Y H, Zhao G P, Zhang P and Zhou H 2020 Effects of shapes of biomimetic coupling units on wear resistance of 7075 aluminum alloy Opt. Laser Technol. 121 105786

Yu D H, Zhou T, Zhou H, Zhang P and Yan Y Y 2022 Effects of pearlite on thermal fatigue and wear resistance of gray cast iron treated by laser J. Mater. Eng. Perform. 31 3962-74

Lu H Q, Liu M, Yu D H, Zhou T, Zhou H, Zhang P, Bo H F, Su W, Zhang Z H and Bao H 2018 Effects of different graphite types on the thermal fatigue behavior of bionic laser-processed gray cast iron Metall. Mater. Trans. A 49 5848-57

Zhang Z H, Lin P Y, Zhou H and Ren L Q 2013 Microstructure, hardness, and thermal fatigue behavior of H21 steel processed by laser surface remelting Appl. Surf. Sci. 276 62-67

Sui Q, Zhou H, Bao H, Zhang P, Yuan Y H and Meng C 2018 Wear behavior of quenched iron with various shapes and unit processed through two-step laser alloying of C powder Opt. Laser Technol. 104 103-11

Gu D D, Shi X Y, Poprawe R, Bourell D L, Setchi R and Zhu J H 2021 Material-structure-performance integrated laser-metal additive manufacturing Science 372 eabg1487

Gong G H, Ye J J, Chi Y M, Zhao Z H, Wang Z F, Xia G, Du X Y, Tian H F, Yu H J and Chen C Z 2021 Research status of laser additive manufacturing for metal: a review J. Mater. Res. Technol. 15 855-84

Feenstra D R, Banerjee R, Fraser H L, Huang A, Molotnikov A and Birbilis N 2021 Critical review of the state of the art in multi-material fabrication via directed energy deposition Curr. Opin. Solid State Mater. Sci. 25 100924

Tan C L et al 2023 Review on field assisted metal additive manufacturing Int. J. Mach. Tools Manuf. 189 104032

Frazier W E 2014 Metal additive manufacturing: a review J. Mater. Eng. Perform. 23 1917-28

Feng J W, Fu J Z, Yao X H and He Y 2022 Triply periodic minimal surface (TPMS) porous structures: from multi-scale design, precise additive manufacturing to multidisciplinary applications Int. J. Extrem. Manuf. 4 022001

Bandyopadhyay A, Mitra I, Avila J D, Upadhyayula M and Bose S 2023 Porous metal implants: processing, properties, and challenges Int. J. Extrem. Manuf. 5 032014

Xiao Z F, Yang Y Q, Xiao R, Bai Y C, Song C H and Wang D 2018 Evaluation of topology-optimized lattice structures manufactured via selective laser melting Mater. Des. 143 27-37

Wang C, Huang H, Zhang Z Y, Zhang L, Yan J W and Ren L Q 2022 Formation, evolution and characterization of nanoporous structures on the Ti₆Al₄V surface induced by nanosecond pulse laser irradiation Mater. Des. 223 111243

Aage N, Andreassen E, Lazarov B S and Sigmund O 2017 Giga-voxel computational morphogenesis for structural design Nature 550 84-86

Lin K J, Hu K M and Gu D D 2019 Metallic integrated thermal protection structures inspired by the Norway spruce stem: design, numerical simulation and selective laser melting fabrication Opt. Laser Technol. 115 9-19

Yang J K, Gu D D, Lin K J, Yang Y and Ma C L 2019 Optimization of bio-inspired bi-directionally corrugated panel impact-resistance structures: numerical simulation and selective laser melting process J. Mech. Behav. Biomed. Mater. 91 59-67

Yang J K, Gu D D, Lin K J, Yuan L H, Guo M, Zhang H and Liu H 2022 Laser powder bed fusion of mechanically efficient helicoidal structure inspired by mantis shrimp Int. J. Mech. Sci. 231 107573

Gu D D, Yang J K, Lin K J, Ma C L, Yuan L H, Zhang H M, Guo M and Zhang H 2021 Compression performance and mechanism of superimposed sine-wave structures fabricated by selective laser melting Mater. Des. 198 109291

Wang H R, Gu D D, Lin K J, Xi L X and Yuan L H 2019 Compressive properties of bio-inspired reticulated shell structures processed by selective laser melting Adv. Eng. Mater. 21 1801168

Todaro C J, Easton M A, Qiu D, Zhang D, Bermingham M J, Lui E W, Brandt M, StJohn D H and Qian M 2020 Grain structure control during metal 3D printing by high-intensity ultrasound Nat. Commun. 11 142

Bandyopadhyay A, Zhang Y N and Onuike B 2022 Additive manufacturing of bimetallic structures Virtual Phys. Prototyp. 17 256-94

Li X R, Li Q, Nie M H, Kong D Y, Liu Z L and Zhang Z H 2023 Evading the strength-ductility trade-off dilemma in steel-nickel heterostructured material by bionic crossedlamellar structures Virtual Phys. Prototyp. 18 e2266640

Li X R, Jiang P F, Nie M H, Liu Z L, Liu M Q, Qiu Y M, Chen Z K and Zhang Z H 2023 Enhanced strengthductility synergy of laser additive manufactured stainless steel/Ni-based superalloy dissimilar materials characterized by bionic mechanical interlocking structures J. Mater. Res. Technol. 26 4770-83

Tan C L, Liu Y C, Weng F, Ng F L, Su J L, Xu Z K, Ngai X D and Chew Y 2022 Additive manufacturing of voxelized heterostructured materials with hierarchical phases Addit. Manuf. 54 102775

Schneider-Maunoury C, Weiss L, Acquier P, Boisselier D and Laheurte P 2017 Functionally graded Ti₆Al₄V-Mo alloy manufactured with DED-CLAD^® process Addit. Manuf. 17 55-66

Reyssat E and Mahadevan L 2009 Hygromorphs: from pine cones to biomimetic bilayers J. R. Soc. Interface 6 951-7

Armon S, Efrati E, Kupferman R and Sharon E 2011 Geometry and mechanics in the opening of chiral seed pods Science 333 1726-30

Ali H, Abilgaziyev A and Adair D 2019 4D printing: a critical review of current developments, and future prospects Int. J. Adv. Manuf. Technol. 105 701-17

Nishiguchi A, Mourran A, Zhang H and Möller M 2018 In-gel direct laser writing for 3D-designed hydrogel composites that undergo complex self-shaping Adv. Sci. 5 1700038

Ma Z C, Zhang Y L, Han B, Hu X Y, Li C H, Chen Q D and Sun H B 2020 Femtosecond laser programmed artificial musculoskeletal systems Nat. Commun. 11 4536

Zhu Q L, Du C, Dai Y H, Daab M, Matejdes M, Breu J, Hong W, Zheng Q and Wu Z L 2020 Light-steered locomotion of muscle-like hydrogel by self-coordinated shape change and friction modulation Nat. Commun. 11 5166

Tan C L, Deng C, Li S, Abena A, Jamshidi P, Essa K, Wu L K, Xu G H, Attallah M M and Liu J 2022 Mechanical property and biological behaviour of additive manufactured TiNi functionally graded lattice structure Int. J. Extrem. Manuf. 4 045003

Rahim M, Frenzel J, Frotscher M, Pfetzing-Micklich J, Steegmüller R, Wohlschlögel M, Mughrabi H and Eggeler G 2013 Impurity levels and fatigue lives of pseudoelastic NiTi shape memory alloys Acta Mater. 61 3667-86

Wei S S, Zhang J L, Zhang L, Zhang Y J, Song B, Wang X B, Fan J X, Liu Q and Shi Y S 2023 Laser powder bed fusion additive manufacturing of NiTi shape memory alloys: a review Int. J. Extrem. Manuf. 5 032001

Ma C L, Gu D D, Lin K J, Dai D H, Xia M J, Yang J K and Wang H R 2019 Selective laser melting additive manufacturing of cancer pagurus’s claw inspired bionic structures with high strength and toughness Appl. Surf. Sci. 469 647-56

Xiong Z X, Li H H, Yang H, Yang Y, Liu Y N, Cui L S, Li X X, Masseling L, Shen L Y W and Hao S J 2022 Micro laser powder bed fusion of NiTi alloys with superior mechanical property and shape recovery function Addit. Manuf. 57 102960

Yu Z L, Xin R L, Xu Z Z, Sha L M, Chen L X, Zhu Y N, Liang P, Zhang Z H, Liu Z Z and Cao Q 2022 Shock-resistant and energy-absorbing properties of bionic NiTi lattice structure manufactured by SLM J. Bionic Eng. 19 1684-98

Zeng Z, Oliveira J P, Ao S S, Zhang W, Cui J M, Yan S and Peng B 2020 Fabrication and characterization of a novel bionic manipulator using a laser processed NiTi shape memory alloy Opt. Laser Technol. 122 105876

Grunenfelder L K, Milliron G, Herrera S, Gallana I, Yaraghi N, Hughes N, Evans-Lutterodt K, Zavattieri P and Kisailus D 2018 Ecologically driven ultrastructural and hydrodynamic designs in stomatopod cuticles Adv. Mater. 30 1705295

Laser-based bionic manufacturing

doi: 10.1088/2631-7990/ad3f59

Abstract

Keywords

通讯作者: 陈斌, bchen63@163.com

Article Metrics